Unit Converter

Uric Acid Unit Converter

Editorial StaffUpdated 4 min read

Quick Overview

Convert uric acid results between mg/dL, µmol/L, mmol/L and mg/L instantly. Includes the formulas, normal values in both unit systems and worked examples.

  • Units7
  • QuantityUric Acid
  • Category—

Formula: µmol/L = mg/dL × 59.48 | mmol/L = mg/dL × 0.05948 | mg/L = µg/mL = mg/dL × 10

Uric acid is reported in different units depending on the country and laboratory. The United States usually uses mg/dL (conventional units), while most of Europe, Asia and Australia use µmol/L (SI units). Some reports use mmol/L or mg/L.

Enter your value below, choose the unit it is in, and see every other unit at once.

📚 This article may have been prepared using trusted medical literature, clinical guidelines, textbooks, and peer-reviewed sources.
View Possible References Used →

Synonyms

  • Urate
  • Serum uric acid
  • UA

Normal and critical values

GroupNormal rangeCritical lowCritical high
Adult male3.4 – 7 mg/dL0.2 – 0.42 mmol/L< 2 mg/dL< 0.12 mmol/L> 13 mg/dL> 0.77 mmol/L
Adult female2.4 – 6 mg/dL0.14 – 0.36 mmol/L< 2 mg/dL< 0.12 mmol/L> 13 mg/dL> 0.77 mmol/L

Reference ranges vary between laboratories and methods. Always use the range printed on your lab report.

Units of measurement

UnitSystemConversion
mg/dLConventionalBase unit
mmol/LSI1 mg/dL = 0.06 mmol/L
µmol/LSI1 mg/dL = 59.5 µmol/L
mg/100mLConventional1 mg/dL = 1 mg/100mL
mg%Conventional1 mg/dL = 1 mg%
mg/LConventional1 mg/dL = 10 mg/L
µg/mLConventional1 mg/dL = 10 µg/mL

Uric acid is reported in several units depending on the country and laboratory. Conventional units are mg/dL (also written mg/100mL or mg%), and SI units are µmol/L or mmol/L. Some labs report mg/L or µg/mL. This converter switches between all seven.

Units that mean the same thing

  • mg/dL = mg/100mL = mg%. The same unit with three names.
  • mg/L = µg/mL. The same unit with two names.

Conversion formulas

  • mg/dL to µmol/L: multiply by 59.48
  • µmol/L to mg/dL: divide by 59.48 (or multiply by 0.0168)
  • mg/dL to mmol/L: multiply by 0.05948
  • mmol/L to mg/dL: multiply by 16.81
  • mg/dL to mg/L (or µg/mL): multiply by 10
  • mg/L (or µg/mL) to mg/dL: divide by 10
  • µmol/L to mmol/L: divide by 1000

The factor comes from the molecular weight of uric acid (168.11 g/mol).

Example

A result of 7.0 mg/dL equals 7.0 × 59.48 = 416 µmol/L, or 0.42 mmol/L, or 70 mg/L.

Uric acid conversion chart

mg/dL (mg/100mL, mg%)µmol/Lmmol/Lmg/L (µg/mL)
2.01190.1220
3.01780.1830
4.02380.2440
5.02970.3050
6.03570.3660
7.04160.4270
8.04760.4880
9.05350.5490
10.05950.60100

Typical reference ranges

Groupmg/dLµmol/Lmmol/L
Adult male3.4 to 7.0200 to 4200.20 to 0.42
Adult female2.4 to 6.0140 to 3600.14 to 0.36

Reference ranges vary between laboratories and methods. Always use the range printed on your lab report. For people treated for gout, a common target is below 6 mg/dL (360 µmol/L); your doctor sets the right goal for you.

Frequently Asked Questions

How do I convert uric acid from mg/dL to µmol/L?

Multiply the mg/dL value by 59.48. For example, 6 mg/dL × 59.48 = 357 µmol/L.

How do I convert uric acid from µmol/L to mg/dL?

Divide the µmol/L value by 59.48, or multiply by 0.0168. For example, 420 µmol/L ÷ 59.48 = 7.06 mg/dL.

How do I convert uric acid from mg/dL to mmol/L?

Multiply the mg/dL value by 0.05948. For example, 7 mg/dL × 0.05948 = 0.42 mmol/L.

Is mg/dL the same as mg/100mL and mg%?

Yes. They are three ways of writing the same unit, so the number does not change between them.

Is mg/L the same as µg/mL?

Yes. 1 mg/L equals 1 µg/mL. To get mg/L from mg/dL, multiply by 10.

Why does the conversion factor use 59.48?

It comes from the molecular weight of uric acid (168.11 g/mol). One mg/dL is 10 mg/L, and dividing by 168.11 gives 0.05948 mmol/L, which is 59.48 µmol/L.

What is a normal uric acid level?

Typical adult ranges are about 3.4 to 7.0 mg/dL (200 to 420 µmol/L) in men and 2.4 to 6.0 mg/dL (140 to 360 µmol/L) in women. Ranges vary by laboratory, so use the range on your report.

What uric acid level is considered high?

Above about 7.0 mg/dL (420 µmol/L) is generally called hyperuricemia. Your laboratory's own range applies.

What uric acid level is considered low?

Below the lower limit of the reference range, roughly under 2.4 to 3.4 mg/dL (140 to 200 µmol/L) depending on sex and laboratory. A doctor should interpret a low result.

What uric acid target is used for gout?

Guidelines commonly aim to keep serum uric acid below 6 mg/dL (360 µmol/L) in people treated for gout. Your doctor sets the target that is right for you.

Why do labs use different units for uric acid?

Some countries report conventional units (mg/dL), while others use SI units (µmol/L or mmol/L). They are the same measurement written in different units.

Do men and women have different uric acid ranges?

Yes. Men usually have higher levels than premenopausal women, so the reference range is slightly higher for men.

Is this converter a substitute for medical advice?

No. It only converts units. Ask your doctor to interpret your result.

References

  1. Kratz A, Ferraro M, Sluss PM, Lewandrowski KB. Case Records of the Massachusetts General Hospital: Laboratory reference values. N Engl J Med. 2004;351(15):1548-1563.
  2. FitzGerald JD, et al. 2020 American College of Rheumatology Guideline for the Management of Gout. Arthritis Care Res. 2020;72(6):744-760.
  3. Rifai N, Horvath AR, Wittwer CT, editors. Tietz Textbook of Clinical Chemistry and Molecular Diagnostics. 6th ed. Elsevier; 2018.
  4. MedlinePlus. Uric Acid Blood Test. https://medlineplus.gov/lab-tests/uric-acid-blood-test/

Discussion 0

Join the discussion

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Join our community

Get fresh content from Lab Tests Guide