Quick Overview
Calculate LDL, VLDL, non-HDL cholesterol, cholesterol ratios, the Atherogenic Index of Plasma and total lipids from total cholesterol, HDL and triglycerides. Enter mg/dL or mmol/L and see all units instantly.
- Results14
- Inputs4
- Units7
- CategoryClinical Biochemistry
Table of Contents
A lipid profile measures the fats in your blood: total cholesterol (TC), HDL cholesterol, triglycerides (TG) and, usually, LDL cholesterol. Most laboratories measure TC, HDL and TG, then calculate LDL, VLDL and non-HDL.
Enter your three results below. The calculator works in mg/dL or mmol/L, picks the right LDL method for your triglyceride level, and shows ratios, the Atherogenic Index of Plasma (AIP) and several total lipid estimates.
Formulas Explained
LDL cholesterol
| Method | Formula (mg/dL) | Use when |
|---|---|---|
| Friedewald (1972) | LDL = TC − HDL − TG/5 (mmol/L: LDL = TC − HDL − TG/2.2) | Triglycerides below 400 mg/dL (4.5 mmol/L) |
| Sampson / NIH (2020) | LDL = TC/0.948 − HDL/0.971 − (TG/8.56 + TG × non-HDL/2140 − TG²/16100) − 9.44 | Triglycerides up to 800 mg/dL; more accurate when TG is above 150 mg/dL or LDL is below 70 mg/dL |
| Martin / Hopkins (2013) | LDL = TC − HDL − TG ÷ adjustable factor (from a 180-cell table of TG and non-HDL) | Triglycerides below 400 mg/dL (extended table to 800); use the published table or your laboratory report |
The “auto” result uses Friedewald below 400 mg/dL and Sampson from 400 to 800 mg/dL. Above 800 mg/dL, request a direct LDL measurement.
Other values
- VLDL-C = TG ÷ 5 (mg/dL), or TG ÷ 2.2 (mmol/L). Triglycerides must be below 400 mg/dL.
- Non-HDL-C = TC − HDL. It includes LDL, VLDL, IDL and lipoprotein(a), so it works at any triglyceride level.
- Risk ratios: TC/HDL (Castelli I), LDL/HDL (Castelli II), TG/HDL.
- Atherogenic Index of Plasma (AIP) = log10 (TG ÷ HDL) with both in mmol/L. The calculator converts for you.
- Total lipids (mg/dL): the five estimates are shown because laboratories use different methods. They are rough estimates, not diagnostic values. 1 g/L = 100 mg/dL.
Worked Example
Input: TC 220 mg/dL, HDL 40 mg/dL, TG 180 mg/dL.
| Result | Value | Category (ATP III) |
|---|---|---|
| LDL (Friedewald) | 220 − 40 − 36 = 144 mg/dL (3.72 mmol/L) | Borderline high |
| LDL (Sampson/NIH) | 147 mg/dL | Borderline high |
| VLDL | 180 ÷ 5 = 36 mg/dL (0.93 mmol/L) | — |
| Non-HDL | 220 − 40 = 180 mg/dL (4.65 mmol/L) | Borderline high (160–189) |
| TC / HDL | 5.5 | Elevated |
| LDL / HDL | 3.6 | Elevated |
| TG / HDL | 4.5 | Elevated |
| AIP | 0.29 | High risk (above 0.21) |
| Total lipids (2.25 × TC + TG + 90) | 765 mg/dL (7.65 g/L) | — |
Low HDL (below 40 mg/dL) and high LDL and non-HDL together point to a higher cardiovascular risk. A clinician decides on lifestyle changes or medicines after looking at the whole picture (age, blood pressure, smoking, diabetes, family history).
High-triglyceride example: TC 260, HDL 35, TG 450 mg/dL. Friedewald is not valid; the Sampson/NIH LDL is 141 mg/dL.
Interpretation
Cholesterol categories (NCEP ATP III)
| Test | mg/dL | mmol/L | Category |
|---|---|---|---|
| Total cholesterol | below 200 | below 5.2 | Desirable |
| 200–239 | 5.2–6.1 | Borderline high | |
| 240 or more | 6.2 or more | High | |
| LDL cholesterol | below 100 | below 2.6 | Optimal |
| 100–129 | 2.6–3.3 | Near optimal / above optimal | |
| 130–159 | 3.4–4.1 | Borderline high | |
| 160–189 | 4.1–4.8 | High | |
| 190 or more | 4.9 or more | Very high | |
| HDL cholesterol | below 40 | below 1.0 | Low (a risk factor; below 50 mg/dL in women) |
| 60 or more | 1.55 or more | High (protective) | |
| Triglycerides | below 150 | below 1.7 | Normal |
| 150–199 | 1.7–2.2 | Borderline high | |
| 200–499 | 2.3–5.6 | High | |
| 500 or more | 5.7 or more | Very high (pancreatitis risk) | |
| Non-HDL cholesterol (LDL goal + 30) | below 130 | below 3.4 | Desirable |
| 130–159 | 3.4–4.1 | Above optimal | |
| 160–189 | 4.1–4.9 | Borderline high | |
| 190–219 | 4.9–5.7 | High | |
| 220 or more | 5.7 or more | Very high |
Ratios and AIP (commonly used cut-offs, not formal guidelines)
| Index | Lower risk | Higher risk |
|---|---|---|
| TC / HDL | below 5 (best below 3.5) | above 5 |
| LDL / HDL | below 3.5 (best below 3) | above 3.5 |
| TG / HDL (mg/dL) | below 2 | above 3 to 4 may suggest insulin resistance |
| AIP | below 0.11 low risk | 0.11–0.21 intermediate; above 0.21 increased risk |
Individual LDL targets
Treatment targets depend on your overall risk, so there is no single goal for everyone. For example, the 2019 ESC/EAS guideline suggests LDL below 55 mg/dL (1.4 mmol/L) for very high risk, below 70 mg/dL (1.8 mmol/L) for high risk, and below 100 mg/dL (2.6 mmol/L) for moderate risk. Your clinician sets your own target.
Fasting or non-fasting?
A fasting sample (9–12 hours) gives the most reliable triglycerides and calculated LDL. Modern guidelines also accept non-fasting samples. Non-fasting triglycerides of 175 mg/dL (2.0 mmol/L) or more, or fasting values of 150 mg/dL (1.7 mmol/L) or more, are flagged as high.
Lipid unit conversion factors
| Parameter | mg/dL → mmol/L | mmol/L → mg/dL | Example |
|---|---|---|---|
| Total, LDL, HDL, VLDL and non-HDL cholesterol | ÷ 38.67 | × 38.67 | 200 mg/dL = 5.17 mmol/L |
| Triglycerides | ÷ 88.57 | × 88.57 | 150 mg/dL = 1.69 mmol/L |
| Total lipids | ÷ 100 (to g/L) | × 100 | 765 mg/dL = 7.65 g/L |
Some references round the triglyceride factor to 88.5.
Limitations
- Calculated LDL and VLDL are estimates, not measured values.
- Friedewald is not valid when triglycerides are 400 mg/dL (4.5 mmol/L) or higher. Sampson/NIH is valid up to 800 mg/dL (9.0 mmol/L); above that, request a direct LDL.
- Results can be less accurate in liver or kidney disease, type III hyperlipoproteinemia and some medicines.
- This calculator is for education and does not replace your doctor's advice.
FAQ
What is a lipid profile?
A lipid profile is a blood test that measures total cholesterol, HDL cholesterol, triglycerides and usually LDL cholesterol to estimate your risk of heart disease and stroke.
How is LDL cholesterol calculated?
Friedewald uses LDL = total cholesterol − HDL − triglycerides/5 (mg/dL). It is valid when triglycerides are below 400 mg/dL. The Sampson/NIH equation is more accurate at low LDL or high triglycerides and works up to 800 mg/dL.
What is non-HDL cholesterol?
Non-HDL cholesterol is total cholesterol minus HDL. It includes LDL, VLDL and other atherogenic particles and does not need a fasting sample.
Which method should I use for LDL?
Use Friedewald when triglycerides are below 400 mg/dL. Use Sampson/NIH, or a direct LDL measurement, when triglycerides are higher. This calculator picks the method automatically.
Do I need to fast for a lipid profile?
Fasting for 9–12 hours gives the most reliable triglycerides and calculated LDL. Non-fasting tests are accepted in many guidelines, but very high non-fasting triglycerides may need a repeat fasting test.
What is a normal lipid profile?
Typical desirable values are total cholesterol below 200 mg/dL, LDL below 100 mg/dL, HDL 40 mg/dL or higher (60 or higher is protective), triglycerides below 150 mg/dL and non-HDL below 130 mg/dL.
What is the Atherogenic Index of Plasma?
AIP is log10 of triglycerides divided by HDL, both in mmol/L. Below 0.11 is lower risk, 0.11 to 0.21 intermediate and above 0.21 higher risk.
How do I convert cholesterol from mg/dL to mmol/L?
Divide by 38.67. For triglycerides, divide by 88.57. For example, 200 mg/dL cholesterol is 5.17 mmol/L.
Why is my calculated LDL different from the lab report?
Laboratories may use another equation (Friedewald, Martin/Hopkins or Sampson/NIH) or measure LDL directly. Small differences are expected, especially when triglycerides are high or LDL is low.
Can I lower my cholesterol without medicine?
Many people improve their lipids with a healthy diet, regular activity, weight loss and stopping smoking. Whether you also need a medicine is a decision for your clinician.
References
- Friedewald WT, Levy RI, Fredrickson DS. Estimation of the concentration of low-density lipoprotein cholesterol in plasma, without use of the preparative ultracentrifuge. Clin Chem. 1972;18(6):499-502.
- Martin SS, Blaha MJ, Elshazly MB, et al. Comparison of a novel method vs the Friedewald equation for estimating low-density lipoprotein cholesterol levels from the standard lipid profile. JAMA. 2013;310(19):2061-2068.
- Sampson M, Ling C, Sun Q, et al. A new equation for calculation of low-density lipoprotein cholesterol in patients with normolipidemia and/or hypertriglyceridemia. JAMA Cardiol. 2020;5(5):540-548.
- National Center for Health Statistics. Comparison of Friedewald, Martin and Sampson LDL-C equations in US adults. NHSR No. 220. https://www.cdc.gov/nchs/data/nhsr/nhsr220.pdf
- National Cholesterol Education Program. Third Report of the Adult Treatment Panel (ATP III) At-a-Glance. NIH Publication No. 01-3305, 2001.
- Grundy SM, et al. 2018 AHA/ACC multisociety guideline on the management of blood cholesterol. Circulation. 2019;139(25):e1082-e1143.
- Mach F, et al. 2019 ESC/EAS guidelines for the management of dyslipidaemias. Eur Heart J. 2020;41(1):111-188.
- Nordestgaard BG, et al. Fasting is not routinely required for determination of a lipid profile. Eur Heart J. 2016;37(25):1944-1958.
- Dobiasova M, Frohlich J. The plasma parameter log (TG/HDL-C) as an atherogenic index. Clin Biochem. 2001;34(7):583-588.
- Niroumand S, et al. Atherogenic Index of Plasma (AIP): a marker of cardiovascular disease. Med J Islam Repub Iran. 2015;29:240.
This page is for educational purposes only and is not a substitute for professional medical advice, diagnosis or treatment. Read the full disclaimer


Discussion 0